Page Vault changelog

New features and improvements in Page Vault.

  1. The new Page Vault Review: every capture in your case, reviewed for you

    Review Hero

    Every capture in your case, reviewed for you. Send your captures and case context to the new Review, and it ranks them by relevance and points you to the pages worth marking. You decide what stays.

    What's new

    • Case context. Describe the case in a few sentences. Review rates each capture as high, some or low relevance and shows the reason for each rating.
    • Suggested marks. Inside a capture, Review suggests the pages that look relevant and explains why. Accept a suggestion to turn it into a highlight, or dismiss it. Nothing is marked until you accept it.
    • Search across a whole case. Search with a word, a phrase or a description of what you need. Results include exact text, matching images and related content on the same topic, even when it uses different words.
    • Your own marks. Add highlights, redactions and annotations to any page.
    • Exports you can hand off. Export one capture or many as a ZIP or one merged PDF, with your marks, search results, or with Review's suggestions. Each capture opens with a Review Summary.
    • Auto-add by Case ID. Turn it on for a case, and new captures with that Case ID join it on their own.

    A clear workflow, from captures to marked evidence

    The new Review gives every case a clear starting point. Add your case context, and you get a ranked list and a short set of suggested pages to check. When you're done, export what you found and send it to anyone, with or without a Page Vault login.

    How to try it

    Send your captures to Review from the portal and add your case context, when you create the case or any time after. Review ranks every capture in the case against it. New to Review? Open the Demo case to see a finished example, or take the tour.

    Good to know

    • Available to everyone with access to Review. Don't have it yet? Open Review in the portal to book a call with our team and get set up. If you've used Review before, your cases, captures and marks are already there.
    • For a case you created before today, Review starts from the case's existing description. Its captures are already ranked against it.
    • Relevance ratings and suggested marks are generated by AI. Treat them as suggestions and verify them against the capture.
    • Auto-add by Case ID covers your own captures. Site crawls and captures shared with you aren't added automatically.
      Learn more in our help article.
  2. Instagram captions and a date range in "Get post URLs"

    What's new

    "Get post URLs" in the Page Vault Browser gained two improvements for Instagram and TikTok profiles.

    Instagram captions in the post list

    • The CSV for an Instagram profile now has a caption column next to each post URL.
    • Posts and reels both get their caption, with emoji and line breaks kept.
    • A post with no caption has an empty cell and still has its date.

    Date range for Instagram and TikTok

    • You can set a start date, an end date, or both before the scrape runs. A "Last 30 days" preset is included.
    • Only posts inside the range are listed.
    • The scrape stops once it reaches posts older than the start date, so a short range on a large profile finishes much sooner than a full scrape.
    • Pinned posts at the top of a profile do not stop the scrape early.
    • A post whose date cannot be read is still listed.
    • With no range set, every post is listed, as before.

    Why it matters

    Before, you had to scrape a whole profile, then open posts one by one to see what each said and trim the URL list by hand to the dates you needed. That was slow and easy to get wrong in a forensic collection. Now the list shows what each Instagram post says and covers only the period you care about. You can choose what to capture straight from the list.

    How to use it

    1. In the Page Vault Browser, open an Instagram or TikTok profile.
    2. Open the "Get post URLs" panel.
    3. Optionally, under the email field, set a start date, an end date, or both, or choose "Last 30 days".
    4. Run the scrape. For Instagram profiles, the CSV includes each post's caption.

    Unless you are signed in to Instagram, post dates are estimated. A post can sit a few hours earlier than the date shown on the site.

    Who gets it

    This is on for every account.

    In this update

    • Instagram captions and a date range in "Get post URLs"
  3. See post dates and TikTok captions in your Instagram and TikTok profile captures

    What's new

    Instagram and TikTok profile captures now include more detail for each post in the CSV export.

    • Post date (Instagram and TikTok): A new post date column shows when each post was created, in UTC. It works for Instagram posts, reels and TV links, and for TikTok videos and photo posts. If a date can't be read, the cell is left empty.
    • Caption (TikTok): A new caption column shows the full text of each TikTok post's caption. The "created by <author> with <music>" text that TikTok adds to the end is removed. A caption that itself contains the words "created by" keeps them. Posts with no caption have an empty cell.

    On accuracy: TikTok dates are within seconds of the time TikTok shows. Instagram dates match for normal posts. A reel that was drafted or scheduled can show an earlier date, because Instagram sets the date when the upload starts, not when the post is published.

    Facebook captures are unchanged. They already include an estimated date.

    Why it matters

    Before, the export listed each post's link but not its date or caption. Finding the posts from a certain time period or about a certain topic meant opening them one by one. Now you can sort the export by date and search TikTok captions directly in the spreadsheet.

    How to use it

    Capture an Instagram or TikTok profile in the Page Vault Browser as usual. The post date column, and the caption column for TikTok, appear in the CSV you receive by email. No new settings are needed.

    Who gets it

    This is on for every account.

    In this update

    • Post dates and TikTok captions in social profile captures
  4. Capture Instagram and Facebook stories, plus Instagram highlights, in the Page Vault Browser

    What's new

    The Page Vault Browser now captures stories without the manual copy-and-paste workaround.

    • Instagram: Open an Instagram profile while signed in and click Get stories. The browser collects the account's live stories and highlights and sends them to Batch. Videos go to a Videos job and photos go to a Documents job. The browser also captures the story viewer page as a PDF, with the username and the age label.
    • Facebook: On a Facebook Page or profile, a new Facebook stories capture type sits next to the page capture. It sends every card of the live story to a single Documents job named after the Page owner. You can also turn on Capture each story page to save each story card's viewer page as a PDF. This option is off by default.

    Why it matters

    Before this release, capturing stories meant copying each media link by hand from a third-party site or from developer tools and pasting it into a Batch job. Now one action in the Page Vault Browser collects the stories for you and sends them to Batch right away.

    How to use it

    Instagram stories and highlights

    1. Sign in to Instagram in the Page Vault Browser.
    2. Open the profile you want to capture.
    3. Click Get stories.

    Facebook stories

    1. Log in to Facebook in the Page Vault Browser. If you are not logged in, the capture stops and asks you to log in.
    2. Open the Page or profile.
    3. Choose Facebook stories capture. Turn on Capture each story page if you also want a PDF of each story card.

    Good to know:

    • Stories are viewed as your own signed-in account. A private profile's stories are visible only if that account can see them.
    • Story media links expire within hours, so the jobs are sent at once. A late retry of a photo can fail.
    • If a Facebook Page has no live story, you see "This Page has no live stories right now."
    • Facebook Pages have no highlights, so the Facebook capture covers live stories only.
    • Some Facebook story cards have no media. These cards are skipped.

    Who gets it

    This feature is on for every account using the Page Vault Browser.

    In this update

    • Instagram/Facebook Stories and Highlights Captured in Page Vault Browser
  5. Estimate pages before you capture in the Page Vault Browser

    Estimate pages

    You can now see how many pages a capture will use before you run it. The capture panel in the Page Vault Browser estimates the PDF page count for the page you have open, so you can check it against your page limit before you commit.

    What’s new

    • An Estimated pages line now sits above the Cancel and Capture buttons. Click Calculate to measure the page with your current capture settings.
    • The estimate scrolls the page the same way a real capture does, so long and lazy-loading pages are measured in full. It takes about half as long as a capture, and you can cancel at any time.
    • Running an estimate doesn’t save anything or count toward your page limit.

    Get a page count before you get approval

    Teams told us they need a page count before a case team approves a capture, the same way they’d ask a vendor for a quote. Now you can run the estimate, share the number, and capture once it’s approved.

    Good to know

    • Estimates are available for single captures in the Page Vault Browser using standard capture types. They aren’t available for social media capture types, batch captures, or site crawls.
    • The estimate only counts pages that apply to your page limit, so the cover page isn’t included.
    • Video downloads aren’t included in the estimate. Each video counts as 10 pages toward your page limit.
    • Estimates closely match the final count. Pages that change between estimating and capturing, like feeds with new posts, can shift the result.

    Try it

    Open a page in the Page Vault Browser, open the capture panel, choose your capture type and settings, and click Calculate next to Estimated pages.

  6. Filter folders in the Page Vault portal

    What's new

    You can now filter folders in the Page Vault portal's folder view. The search captures area also has updated styling.

    Why it matters

    When you have many folders, filtering lets you narrow the list and get to the folder you need faster, without scrolling through everything.

    How to use it

    1. Open the Page Vault portal and go to the folder view.
    2. Use the folder filter to narrow the list of folders shown.
    Screenshot 2026-10-22 at 8.29.22 AM

    Who gets it

    This is on for every Page Vault account.

    In this update

    • Portal Folder Filter
  7. Directory Sync keeps Page Vault users in step with your identity provider

    What's new

    Page Vault now supports Directory Sync (SCIM) for accounts that sign in with SSO. When Directory Sync is turned on for your SSO connection, changes made in your identity provider carry over to Page Vault automatically:

    • People you add in your identity provider appear in Page Vault before they ever sign in.
    • People you remove are deactivated in Page Vault and can no longer sign in.
    • People you add back are reactivated as the same user, with no duplicate record.
    • Email changes made in your identity provider carry over to Page Vault, including the address the user signs in with.

    Supported identity providers include Okta, Microsoft Entra ID, Google Workspace and other SCIM 2.0 providers. Existing sign-in and invitation flows work as before.

    Why it matters

    Before this release, a user only appeared in Page Vault after their first SSO sign-in. Removing someone in your identity provider did nothing in Page Vault, so access stayed open until someone removed the user by hand. Directory Sync lets you manage access in one place, and departing staff lose access to your captured content as soon as you remove them. This supports your compliance and offboarding processes.

    How to use it

    Directory Sync is set up on your account's SSO connection. To turn it on, contact your Page Vault representative. After it is on, manage users in your identity provider as usual: assign or unassign people to the Page Vault app, and edit their names or email addresses there. Changes can take up to a minute to reach Page Vault.

    Who gets it

    Directory Sync is available to every account that uses SSO.

    In this update

    • SCIM Directory Sync
  8. Your browsing history is now saved in the Page Vault Browser

    What's new

    The Page Vault Browser now keeps a record of the web pages you visit, so you can find and reopen them later.

    • Browsing history screen: Pages are listed by day, newest first, with the time, title and address of each. You can search the list, click a page to open it in a new tab, and delete single entries.
    • Clear by time range: You can clear your history for the last hour, last 24 hours, last 7 days or all time. A confirmation step comes first.
    • Address bar suggestions: As you type in the address bar, matching pages from your history appear below it.
    • History carries over between sessions: History is kept separately for each user and is still there when you end a session and start a new one.
    • Clear on exit: A new "Clear browsing history on exit" setting deletes your history each time you end the session.

    Why it matters

    You no longer have to remember or retype the address of a page you visited earlier, even when you visited it in a previous session. You can go back to sources quickly and keep working on your captures. You also control your history: you can delete single pages, clear a time range, or have the browser clear everything each time you end a session.

    How to use it

    1. Open the browser from Page Vault with Use Browser.
    2. Open the gear menu at the bottom of the sidebar and choose Browsing history.
    3. Type in Search history to filter the list. Click a page to open it in a new tab, or hover a row and click its trash icon to delete it.
    4. To clear a time range, pick the range, click Clear browsing history, then confirm with Clear.
    5. To clear your history automatically, go to the gear menu → Browser settings → Privacy and turn on "Clear browsing history on exit".

    Who gets it

    Browsing history is on for every Page Vault account.

    In this update

    • PV11 Browser History
  9. Capture LinkedIn pages without logging in

    What's new

    Page Vault now captures LinkedIn pages even when no LinkedIn login cookies are provided. If LinkedIn shows a login popup over the page, Page Vault closes it and captures the page underneath.

    Why it matters

    LinkedIn often puts a login popup over its pages for visitors who are not signed in. That popup could block the content you needed or stop the capture altogether. You can now capture LinkedIn content without first supplying a login session, and the popup no longer covers your capture.

    How to use it

    There is nothing to turn on.

    1. Capture a LinkedIn page in Page Vault the way you normally would.
    2. If no LinkedIn cookies are provided, Page Vault closes the login popup and captures the page.

    Who gets it

    This is on for every Page Vault account.

    In this update

    • LinkedIn Capture w/o Login
  10. Delete a capture while viewing it, without going back to the folder

    What's new

    You can now delete a capture straight from the single-capture view. A new Delete button sits in the bottom toolbar when you are looking at a capture. After you confirm, Page Vault takes you to the next capture in the folder, or back to the folder if there are no more captures.

    Why it matters

    When reviewing captures one by one, you used to have to leave the capture, return to the folder view and find the capture again before you could delete it. Now you can delete the capture in front of you and move straight on to the next one, which makes QA of a folder faster.

    How to use it

    1. Open a capture from a folder to see it in the single-capture view.
    2. Click Delete in the bottom toolbar.
    3. Confirm in the dialog. This is the same confirmation you see when deleting from the folder view.
    4. Page Vault opens the next capture in the folder, or returns you to the folder if this was the last one.

    The Delete button appears only if you can edit the folder the capture is in.

    Who gets it

    Available now for every Page Vault account. Users who can edit a folder see the Delete button on its captures.

    In this update

    • Delete (or flag for recapture) from the capture view
  11. Sort the Capture Summary HTML file by any column

    What's new

    You can now sort the table in the delivered "Page Vault Capture Summary.html" file by any column, not only by capture ID.

    • Click a column header to sort the table by that column. Click it again to reverse the order.
    • An indicator shows which column is sorted and in which direction.
    • Numbers and dates sort by their value, not as plain text.
    • Hiding columns and previewing thumbnails work as before.
    • The file still works offline.

    Why it matters

    Many clients review their deliveries in the Capture Summary HTML file. Until now its table was always sorted by capture ID. Reviewers can now reorder it by the field they are working with, right in the file.

    How to use it

    1. Open the "Page Vault Capture Summary.html" file from your delivery.
    2. Click the header of the column you want to sort by.
    3. Click the same header again to reverse the order.

    Who gets it

    This is on for every account.

    In this update

    • Sortable columns in the Capture Summary HTML export
  12. YouTube captures now save the newest comments

    What's new

    YouTube captures that include comments now switch the comment section to Newest before the comments are expanded. Before, YouTube's default Top sort decided which comments were saved.

    If the comments are already sorted by Newest, the capture leaves them as they are. If a video has comments turned off, the capture runs as before.

    Why it matters

    The Top sort leaves out comments, and recent comments are often the ones you need to preserve. You could switch the sort by hand in the Page Vault Browser, but batch captures run on their own, so they could miss comments. Now every capture that includes comments saves the most recent ones first, with no extra steps.

    How to use it

    You don't need to do anything. Capture a YouTube video with comments included, in the Page Vault Browser or in a batch. The comments are sorted by Newest automatically.

    Captures that leave comments out are not affected.

    Who gets it

    On for every account.

    In this update

    • YouTube Comments Default to "Top Comments"
  13. From crawl to capture, without leaving the portal

    If you've ever run a crawl and then needed to pick out just a handful of pages to capture, you know the drill: export the CSV, delete the rows you don't need, and re-upload the trimmed list into a new Batch job. It's the kind of extra step that pulls you out of Page Vault and into a spreadsheet.

    Now that whole workflow happens from the crawl itself.

    What's new

    • Select one URL, several, or all of them right from the crawl results
    • See at a glance which ones are already captured and which still need it
    • Capture your selections with a single click — no CSV export or re-upload required
    • Watch each row update in place, from "Capturing…" to a link to view the finished capture

    Your first capture from a crawl asks you to choose a destination folder. Every additional capture from that same crawl saves there automatically — a crawl's captures can't be split across folders, though you can always move things afterward.

    This has been requested before, and it's a natural way to keep your crawl-and-capture workflow inside the portal instead of splitting it across tools.

    How to try it
    Open any completed crawl-only job in your portal, select the URLs you want, and hit Capture selected (or Capture now on a single row).

  14. Get your reports by email on a schedule

    If you run the same report every month for billing or record-keeping, you can now set it up once and have Page Vault email it to you automatically.

    What's new

    • Schedule any report from Basic Reports or Cost Recovery to send weekly, monthly, quarterly, or yearly
    • Send to yourself, your teammates, or people without a Page Vault login, like your billing or finance team
    • Each email includes the report as a CSV attachment, so it's ready to file, forward, or import
    • Send a test email first to check the report before the first scheduled send
    • See every scheduled export for your account in one place, and pause, resume, edit, or cancel the ones you've created

    No more monthly report reminders

    Many teams told us they log in on the first of every month to pull the same report and send it on to billing. Scheduled exports removes that step. The report arrives on your cadence, with the same data you'd get from a manual export.

    How to try it

    Go to Reports, run the report you want, and click Schedule exports next to Export. Your current report type and filters carry into the schedule. Choose a frequency and recipients, then click Schedule exports.

    Find all your scheduled exports on the new Scheduled tab.

    Good to know

    • Available to everyone with access to Reports. Cost Recovery reports can be scheduled by anyone with Cost Recovery access.
    • Emails send at 14:00 UTC.
    • Every email includes an unsubscribe link for each recipient.

    Learn more in our help article.

  15. Bulk update Case/Matter ID from the dashboard

    You can now update the Case/Matter ID on multiple snapshots and file captures at once. No more editing captures one by one.

    What's new

    • Select any combination of snapshots and file captures from the dashboard
    • Open the Actions dropdown and choose Update Case/Matter ID
    • Enter a Case/Matter ID to apply it across your whole selection, or leave the field blank to clear the existing ID
    • Works on every capture type, including videos
    • A confirmation displays when it's done
      Screenshot 2026-05-19 at 8

    Cleanup that used to take hours, now takes seconds

    If you've ever finished a batch capture and realized the Case/Matter ID was wrong or needed to reassign a folder of captures to a different matter you know how much clicking that took. This change closes that gap. Whether you're correcting a single mistake across hundreds of items or moving captures between matters, it's one action on a multi-select.

    How to try it

    Go to your dashboard, select the captures you want to update, click Actions, and choose Update Case/Matter ID. The dialog will show you how many items you've selected before you confirm.
    Available now for all users.

  16. Cost Recovery "By Capture" Report Now Includes Capture URL

    When reviewing captures for client billing, it helps to know exactly which source page each capture came from. Until now, that meant tracking down the URL separately.

    What's new

    The "By Capture" report now includes a Capture URL column showing the original source URL of each captured page. It appears between Capture Name and User, both in the in-app table and in exports. Long URLs are truncated with a tooltip, and each one is a clickable link to the source.
    By Capture includes URL

    This was a direct request from users who needed a faster way to cross-reference line items with their source material during cost recovery review.
    You'll see the new column the next time you run a "By Capture" report under Cost Recovery.

  17. Invite your colleagues to a shared folder in a few clicks

    Sharing a folder with your teammates no longer means typing out each email address. When you click into the invite field in the Share dialog, you'll see everyone at your firm, ready to add.
    Share with everyone at my firm

    What's new

    • Click into the email field to see your firm's members, with their names, emails and photos
    • Click a name to add that person, or start typing to filter by name or email
    • Use Select everyone at my firm at the top of the list to add all your colleagues at once
    • People who already have access to the folder aren't listed, so you won't send duplicate invites
    • You can still type or paste any email address, including people outside your firm

    Built for sharing with large teams

    If you add a big group, the invite list scrolls inside the Share dialog so the dialog stays on screen. Large batches of invites are also more reliable now, and if an invitation can't be sent, we'll tell you exactly which addresses to try again.

    Try it

    Open any folder, click Share and click into the email field. Choose who to invite, then click Send Invite.

    Note: Select everyone invites the people at your firm right now. Colleagues who join later aren't added automatically, so you'll need to invite them when they start.

  18. The legacy browser retires today

    As shown in your portal over the past few months, today marks the retirement of the legacy Page Vault browser. Browser usage has been shifting since launch and over 95% of it already happens in the redesigned browser.

    What's changing: Starting today, every new session opens in the redesigned browser. Already mid-capture in a legacy session? It'll finish out normally, we're not cutting anyone off.

    Why we're doing this: We built the redesigned browser to be the best way to capture the web. It's faster, has a streamlined UX, and uses the latest and greatest capabilities that our team has developed. Retiring the legacy version means every future improvement lands here first, for everyone.

    If today's your first time in the redesigned browser: capture controls now live in a panel on the left instead of across the top, and with Batch capture built right in there's no need to copy and paste cookies. You'll find Batch capture at the bottom of the sidebar.

    Screenshot 2026-08-26 at 2

    Getting started: Nothing to set up on your end. If you'd like a refresher, updated guides and walkthroughs are live in our Help Center.

    Let support know if you're having any issues fully migrating to the new browser. We're tracking issues one by one and actively improving the new browser and offering trainings.

  19. Folder paths in reports now show the full path, not just the name

    If you've ever pulled a report and seen two captures both filed under a folder called "Homepage" or a date, and wondered whether they were actually in the same place, they probably weren't. We've made these improvements to help clarify the location of each folder, especially for cases when multiple folders share the same name.

    What's new:

    Reports that group or list captures by folder now show the full folder path (for example, Matter Files > Client Site > Homepage), not just the folder name on its own. By Folder reports also now include a Folder owner column.

    If a path is too long to display in full, we shorten it and keep the most specific part visible. You can hover over truncated folder paths any time to see the complete path. CSV exports include the full path and folder owner too.

    Page Vault Report Folder Paths and Truncation

    Built for how teams actually organize captures

    Folder names like dates, "Homepage," or case labels get reused constantly across matters and users. Reports now tell folders apart by their unique identity, not just their name, so you can trust that what's grouped together in a report actually belongs together.

    How to see it

    Just pull a By Folder or Capture report in Portal like you normally would, the full paths show up automatically without any setup needed.

    One note: folder moves can take a few minutes to show their new path in reports, since report data refreshes on a short delay.

  20. New "By Type" capture report

    You can now see your captures grouped by Pages, Documents, and Videos in a new By Type report, so it's easy to understand exactly what your team is capturing.

    What's new

    • A new By Type report alongside your existing All Captures, By User, and By Folder views
    • Captures split into three categories: Pages, Documents, and Videos
    • A Total Captures column, plus total-cost columns in the Cost Recovery version
    • Uses the same pricing rules as your other reports (videos count as 10 pages, documents as 1)
    image

    Built for cost recovery and client billing

    Many firms need usage broken out by content type to recover costs and bill clients accurately. Until now you could only approximate this by filtering. The By Type report makes it a first-class view.

    How to try it

    Open your reports and select By Type. Choose your date range and case/matter filters just like any other report.